Overview
In this blog entry, I will cover the entire process of downloading, installing and configuration the preview version of the SAP Enterprise Portal. Currently, SAP NetWeaver 04s SP15 is available for download from right here on the SDN web site. This is a 90-day evaluation installation intended to give you a flavor of what EP is like. The Sneak Preview edition will give you access to the following products:
Take advantage of this opportunity. As I indicated before, there is nothing better for a beginning SAP EP Developer than to practice on the real thing. To get intimately familiar with EP, you should download, install and configure it yourself on your Desktop or Laptop, even if you have access to it on your company's server - unless you've already installed it a few times at work, then you can safely skip this entry.
Step 1. Evaluate minimum installation requirements
First and foremost, evaluate the installation requirements and make sure you meet the minimum recommendations otherwise you may run into unexpected problems with no one to blame except yourself. If your system lacks in any of the stated requirements, save yourself the grief and upgrade before attempting the install. The download page lists the hardware/software requirements in detail, but here's the essence of it:
Step 2. Download
Now that you've ensured your PC has what it takes to run the Portal (or have had to upgrade), you can download the preview edition by going to the SDN download page:
https://www.sdn.sap.com/irj/sdn/downloads
You do need to be a member on SDN to be able to download, so go ahead and sign up, if you still haven't. It's fast and FREE!
Now that you've signed up, download the Full Java Edition (current release SAP NetWeaver 04 SP15), which consists of the following four rar files (rar is just a compressed file format which you can decompress using winrar archiver):
[the download consists of these four files, total size of the files is approximately 4.93 Gigabytes]
The downloaded files alone take up 4.93 Gigabytes of diskspace! Depending on your bandwidth, the download can take anywhere from a few minutes to a few hours - this is where you wish you'd signed up for a high-speed Internet connection.
Step 3. Prepare for Installation
Hopefully, the first two steps were relatively painless and straightforward. Preparing for installation is very important - take the time and prepare properly or you can waste a lot of time and effort.
When you've decompressed the downloaded rar files, you'll notice that there is a DOC folder which is where the installation instructions are. Open the index.htm file located within the html folder inside the DOC folder to view the instructions.
The important items to note from these instructions are as follows:
If this is the first time you're installing the Portal on this computer, all you have to do is ensure your PC meets the minimum hardware/software requirements. If you've installed the Portal or any other SAP product on this PC before, please ensure that you uninstall the previous installation of the Portal and ensure that none of the systems are called "J2E". It so happened that I had installed the previous preview edition of the Portal on the same PC.
Uninstall the previous version of the SAP NetWeaver Developer Studio via the Add/Remove Programs applet from the Control Panel.
To uninstall the previous version of the J2EE server, run the uninstall program located at <install directory>usr\sap\J2E\JC00\uninstsap.exe.
Although everything uninstalled relatively easily, MAXDB was proving to be a bit sticky and no matter how I tried to uninstall it, I kept getting a message that an instance called J2E is still present and I'd have to get rid of it before uninstalling it. After some searching I found an answer on this SDN Forum entry. This is where I advise you to look for an answer for ANY issue you may be experiencing with any SAP product on SDN Forum or post it as a question if you haven't found it already posted.
Excerpt from the Forum Entry:
<pre>
run this command in a dos-box to find out what is installed:
dbmcli inst_enum
dbmcli db_enum
inst_enum just writes out the installed software.
db_enum writes out database instances which are on the host.
To get rid of the database instances you can run this command:
dbmcli -d DB1 -u control,control db_stop
dbmcli -d DB1 -u control,control db_drop
DB1 has to be replaced by the true database name.
dbmcli -d J2E -u control,control db_stop
dbmcli -d J2E -u control,control db_drop
dbmcli -d J2E -u control,control db_state
</pre>
Also, edit the file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP). It must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
And finally, if no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter (detailed instructions are included with the download - see the index.htm file in the DOC/html folder).
Step 4. Create any backups
If your PC has important data, back it up, PRIOR to proceeding with the installation. Enough said!
Step 5. Install
There are a few very good resources available on SDN that detail the complete SAP Preview Edition installation process, which you can use along with this entry. I have listed the most useful of these in the resources section below.
To start the install, double-click on the SAPinst.bat file located in the <extract_directory>NWSneakPreviewSP15
[to start the install process click on the SAPinst.bat]
The installation process begins with a License Agreement. All the values that need to be entered during the installation are present in the documentation included with the downloaded files in the DOC folder. The installation does take a long time (it took more than two hours to complete on my PC). You will have to install the NetWeaver Developer Studio as well as the two database administration tools manually. The installations are straightforward and the instructions are included with the download in the DOC folder.
I took screenshots during the entire installation process and ended up with 100 images. They are a bit too many to include here. I can email them to any of the readers if they need them for any reason. Just leave a comment with your email address or email me.
When the installation has completed, you will see the following icons four icons on your desktop. I suggest you add the last two yourself. One is to the Portal web page (http://localhost:50000/irj/portal) and the other is to start the J2EE Visual Administrator tool, located at <installation drive>usr\sap\j2e\jc00\j2ee\admin\go.bat
[the shortcut icons created after the installation has completed]
The SAP Management Console is based on the Windows 2000 or Windows XP MMC tool and is used to start and stop the J2EE server and the Portal Database instance. It takes a LONG time to start the server so you have to be patient.
[the SAP Management Console tool to start and stop the server]
When the Portal J2EE server has started up, you can log into the Portal with your admin username and admin password by going to the Portal URL: http://localhost:50000/irj/portal
[the SAP EP logon screen]
Viola! You've successfully logged on to the SAP Enterprise Portal! If, however, you were not successful and ran into some problems, don't despair. Check on the SDN Forums and post a new question if you no one else has posted that particular problem.
Resources
SDN Blog Entries:
A Visual Installation Guide on Sneak Preview SAP NetWeaver 04 Java Edition
A Visual Installation Guide on Sneak Preview SAP NetWeaver 04 Java Slim Edition
(Re)Installing Sneak Preview Made Easy - Part 1
SDN Community Contribution:
Installation of SAP NetWeaver 04 SP15
Summary
Overall the installation process for the preview edition of SAP EP 6, is pretty straightforward. This is particularly true if you've prepared yourself (and your PC). Remember to back up your system, just in case things don't go as planned and reserve a lot of time aside before attempting to install.
In this blog entry, I will cover the entire process of downloading, installing and configuration the preview version of the SAP Enterprise Portal. Currently, SAP NetWeaver 04s SP15 is available for download from right here on the SDN web site. This is a 90-day evaluation installation intended to give you a flavor of what EP is like. The Sneak Preview edition will give you access to the following products:
- SAP Web Application Server Java 6.40 (J2EE Engine)
- MaxDB 7.5 database
- SAP NetWeaver Developer Studio 2.0.15
- SAP Enterprise Portal
- SAP Content Management and Collaboration
- SAP NetWeaver Developer Cockpit
- Adobe Document Services
- Composite Applications Framework 2.0 and Guided Procedures 2.0
Take advantage of this opportunity. As I indicated before, there is nothing better for a beginning SAP EP Developer than to practice on the real thing. To get intimately familiar with EP, you should download, install and configure it yourself on your Desktop or Laptop, even if you have access to it on your company's server - unless you've already installed it a few times at work, then you can safely skip this entry.
Step 1. Evaluate minimum installation requirements
First and foremost, evaluate the installation requirements and make sure you meet the minimum recommendations otherwise you may run into unexpected problems with no one to blame except yourself. If your system lacks in any of the stated requirements, save yourself the grief and upgrade before attempting the install. The download page lists the hardware/software requirements in detail, but here's the essence of it:
- Windows 2000, Windows XP Professional or Windows Server 2003
- NTFS-File systems
- Internet Explorer 5.5 or higher or Firefox 1.0 or higher
- At least 1 GB RAM, 2 GB are recommended
- Intel Pentium III/1.1 GHz or higher (or compatible)
- 6 GB hard disk space recommended
- High-resolution monitor (1024x768 or higher, 256 colors)
Step 2. Download
Now that you've ensured your PC has what it takes to run the Portal (or have had to upgrade), you can download the preview edition by going to the SDN download page:
https://www.sdn.sap.com/irj/sdn/downloads
You do need to be a member on SDN to be able to download, so go ahead and sign up, if you still haven't. It's fast and FREE!
Now that you've signed up, download the Full Java Edition (current release SAP NetWeaver 04 SP15), which consists of the following four rar files (rar is just a compressed file format which you can decompress using winrar archiver):
[the download consists of these four files, total size of the files is approximately 4.93 Gigabytes]
The downloaded files alone take up 4.93 Gigabytes of diskspace! Depending on your bandwidth, the download can take anywhere from a few minutes to a few hours - this is where you wish you'd signed up for a high-speed Internet connection.
Step 3. Prepare for Installation
Hopefully, the first two steps were relatively painless and straightforward. Preparing for installation is very important - take the time and prepare properly or you can waste a lot of time and effort.
When you've decompressed the downloaded rar files, you'll notice that there is a DOC folder which is where the installation instructions are. Open the index.htm file located within the html folder inside the DOC folder to view the instructions.
The important items to note from these instructions are as follows:
If this is the first time you're installing the Portal on this computer, all you have to do is ensure your PC meets the minimum hardware/software requirements. If you've installed the Portal or any other SAP product on this PC before, please ensure that you uninstall the previous installation of the Portal and ensure that none of the systems are called "J2E". It so happened that I had installed the previous preview edition of the Portal on the same PC.
Uninstall the previous version of the SAP NetWeaver Developer Studio via the Add/Remove Programs applet from the Control Panel.
To uninstall the previous version of the J2EE server, run the uninstall program located at <install directory>usr\sap\J2E\JC00\uninstsap.exe.
Although everything uninstalled relatively easily, MAXDB was proving to be a bit sticky and no matter how I tried to uninstall it, I kept getting a message that an instance called J2E is still present and I'd have to get rid of it before uninstalling it. After some searching I found an answer on this SDN Forum entry. This is where I advise you to look for an answer for ANY issue you may be experiencing with any SAP product on SDN Forum or post it as a question if you haven't found it already posted.
Excerpt from the Forum Entry:
<pre>
run this command in a dos-box to find out what is installed:
dbmcli inst_enum
dbmcli db_enum
inst_enum just writes out the installed software.
db_enum writes out database instances which are on the host.
To get rid of the database instances you can run this command:
dbmcli -d DB1 -u control,control db_stop
dbmcli -d DB1 -u control,control db_drop
DB1 has to be replaced by the true database name.
dbmcli -d J2E -u control,control db_stop
dbmcli -d J2E -u control,control db_drop
dbmcli -d J2E -u control,control db_state
</pre>
Also, edit the file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP). It must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
And finally, if no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter (detailed instructions are included with the download - see the index.htm file in the DOC/html folder).
Step 4. Create any backups
If your PC has important data, back it up, PRIOR to proceeding with the installation. Enough said!
Step 5. Install
There are a few very good resources available on SDN that detail the complete SAP Preview Edition installation process, which you can use along with this entry. I have listed the most useful of these in the resources section below.
To start the install, double-click on the SAPinst.bat file located in the <extract_directory>NWSneakPreviewSP15
[to start the install process click on the SAPinst.bat]
The installation process begins with a License Agreement. All the values that need to be entered during the installation are present in the documentation included with the downloaded files in the DOC folder. The installation does take a long time (it took more than two hours to complete on my PC). You will have to install the NetWeaver Developer Studio as well as the two database administration tools manually. The installations are straightforward and the instructions are included with the download in the DOC folder.
I took screenshots during the entire installation process and ended up with 100 images. They are a bit too many to include here. I can email them to any of the readers if they need them for any reason. Just leave a comment with your email address or email me.
When the installation has completed, you will see the following icons four icons on your desktop. I suggest you add the last two yourself. One is to the Portal web page (http://localhost:50000/irj/portal) and the other is to start the J2EE Visual Administrator tool, located at <installation drive>usr\sap\j2e\jc00\j2ee\admin\go.bat
[the shortcut icons created after the installation has completed]
The SAP Management Console is based on the Windows 2000 or Windows XP MMC tool and is used to start and stop the J2EE server and the Portal Database instance. It takes a LONG time to start the server so you have to be patient.
[the SAP Management Console tool to start and stop the server]When the Portal J2EE server has started up, you can log into the Portal with your admin username and admin password by going to the Portal URL: http://localhost:50000/irj/portal
[the SAP EP logon screen]
Viola! You've successfully logged on to the SAP Enterprise Portal! If, however, you were not successful and ran into some problems, don't despair. Check on the SDN Forums and post a new question if you no one else has posted that particular problem.
Resources
SDN Blog Entries:
A Visual Installation Guide on Sneak Preview SAP NetWeaver 04 Java Edition
A Visual Installation Guide on Sneak Preview SAP NetWeaver 04 Java Slim Edition
(Re)Installing Sneak Preview Made Easy - Part 1
SDN Community Contribution:
Installation of SAP NetWeaver 04 SP15
Summary
Overall the installation process for the preview edition of SAP EP 6, is pretty straightforward. This is particularly true if you've prepared yourself (and your PC). Remember to back up your system, just in case things don't go as planned and reserve a lot of time aside before attempting to install.
Leave a comment